|
|
|
DeoxIT ®, #K-D1W-25 (Individual Wipes,3 x 3.5")
DeoxIT® D-Series - Contact/Connector, Deoxidizer, Rejuvenator & Protectant
Part No. K-D1W-25: (25 count)
100% Liquid, No solvents
Applicator: Non-woven Fiber Wipes, 3.0 x 3.5", provides NO flushing action, applies 100% DeoxIT®.
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. Provides wiping action - wipe with the grain recommended. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% deoxiding action. - KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Lubricates and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)
* NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
|
|
|
|
 |
 |
 |
Related Items:
Customers who bought this item also bought the following items below: |
|
|
|
|
|
| |
| .......................... |
| |
|
|
|
|
|
|
|
 |
|
 |
|
|
| | |
|
|
