DeoxIT®, #D100L-CPK (Cell Phone Connector Cleaner)
DeoxIT® D-Series - Cell Phone Connector Cleaner & Rejuvenator
Part No. D100L-CPK:
100% Liquid, No solvents
Applicator: Micro Brush, provides NO flushing action, applies 100% DeoxIT®, Great for OEMs or include in service kit.
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
DeoxIT® - Improves the Performance of ALL Cell Phones, Batteries and Electronic Connections.
Batteries, Chargers, Memory Cards, Headsets, Microphones, Cameras, PDA/MP3s, Audio/Video/Computers, etc.
- Clean and rejuvenate battery connections
- Clean and improve charger connections
- Get the most out of your batteries
All battery terminals/connections over time deteriorate from oxidization and corrosion, causing reduced performance and eventually total failure. DeoxIT® cleans, rejuvenates and protects ALL electrical connections. Using DeoxIT® results in brighter lights, extended battery life, improved sound & video quality and faster and reliable data.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
KEY FEATURES: * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
- Improves Conductivity
- Deoxidizes, Cleans and Preserves
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- * Temperature Range, -34 C (-29 F) to +200 C (400 F)