CAIG_netsuite_2011.jpg
  Register   Log In 
Home Products Learning Center Distributor Info About Us Technical Support Shopping Cart Checkout ($25 Min.) Shipping My Account
 Support > Knowledge Base > Applications > Elevator Industry >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 
Support
Knowledge Base
Products
Applications
Battery or Batteries
Electronics
Audio/Video
Auto/Transportation
Avionics/Aerospace
Communications
Computers
Electrical
Best product for silver contact pressure switches ...
DeoxIT® & DeoxIT® GOLD vs Stabilant 22
Life testing on DeoxIT, DeoxIT GOLD & DeoxIT SHIELD
Difference Between 5% & 100% Solutions
Circuit Board works when dry but not when humidity present
Black oxidation from arcing in elevator application
Hobby
Marine
Medical
Photography
Security
Musical Instruments
Notices, Warnings & Product Dye Changes
Fan Club - Received

DeoxIT® DeoxIT® GOLD & DeoxIT® SHIELD - Rule of Thumb

As easy as 1-2-3

Turn system off and disconnect from power source.

Oxidized metal connectors:

1. Apply DeoxIT® contact cleaner to the contact surface. If the surface is heavily oxidized, leave the DeoxIT® on overnight, if possible.
2. The following day, remove any contaminants with a lint-free swab or cloth and "canned" (compressed) air if necessary.
3 When no contaminants are evident on the swab or cloth, apply 1-2 bursts of DeoxIT®.

Oxidized plated metal connectors (i.e. gold or other precious metal):

1 Apply DeoxIT® to the contact surface. If the surface is heavily oxidized, leave the DeoxIT® on overnight, if possible.
2. The following day, remove any contaminants with a lint-free swab and "canned" (compressed) air if necessary.
3. When no contaminants are evident on the swab or cloth, 1-2 bursts DeoxIT® GOLD. Maintain thereafter with DeoxIT® GOLD.

New or clean plated metal connectors:
Apply DeoxIT® GOLD to the surface, and maintain as needed with DeoxIT® GOLD.

Oxidized connectors subjected to extended temperatures, (i.e., vacuum tubes, lamp sockets, etc.). REMEMBER to confine solution to the pin connector/contact surfaces, avoiding other vacuum tube surfaces:

1 Apply DeoxIT® to the surface. If the area is heavily oxidized, leave the DeoxIT® on overnight, if possible.
2. The following day, remove any contaminants with a lint-free swab or cloth and "canned" (compressed) air if necessary.
3. When no contaminants are evident on the swab or cloth, apply 1-2 bursts DeoxIT® GOLD GxL. Maintain thereafter with DeoxIT® GOLD GxL.

DeoxIT® does not necessarily remove any superficial discoloration caused by oxidation.

Wipe off excess product with a clean, lint-free cloth when using 100% solutions.

NOTE:
DeoxIT® GOLD (formerly ProGold)
DeoxIT® GOLD GxL (formerly ProGold GxL)
DeoxIT® SHIELD (formerly PreservIT)
DeoxIT® FaderLube (formerly CaiLube MCL)
DeoxIT® FaderGrease (formerly CaiLube MCL P20 & P40)
DeoxIT® Grease Type M260 & L260 Paste (formerly CaiLube Grease).

 
See Also:Difference between DeoxIT® & R5 Power Booster?
 Can DeoxIT® GOLD build up on RCA plugs?
 Computer Laptop Connector Problems