DeoxIT® DeoxIT® GOLD & DeoxIT® SHIELD - Rule of Thumb
As easy as 1-2-3
Turn system off and disconnect from power source.
Oxidized metal connectors:
1. Apply DeoxIT® contact cleaner to the contact surface. If the surface is heavily oxidized, leave the DeoxIT® on overnight, if possible. 2. The following day, remove any contaminants with a lint-free swab or cloth and "canned" (compressed) air if necessary. 3 When no contaminants are evident on the swab or cloth, apply 1-2 bursts of DeoxIT®.
Oxidized plated metal connectors (i.e. gold or other precious metal):
1 Apply DeoxIT® to the contact surface. If the surface is heavily oxidized, leave the DeoxIT® on overnight, if possible. 2. The following day, remove any contaminants with a lint-free swab and "canned" (compressed) air if necessary. 3. When no contaminants are evident on the swab or cloth, 1-2 bursts DeoxIT® GOLD. Maintain thereafter with DeoxIT® GOLD.
New or clean plated metal connectors: Apply DeoxIT® GOLD to the surface, and maintain as needed with DeoxIT® GOLD. Oxidized connectors subjected to extended temperatures, (i.e., vacuum tubes, lamp sockets, etc.). REMEMBER to confine solution to the pin connector/contact surfaces, avoiding other vacuum tube surfaces:
1 Apply DeoxIT® to the surface. If the area is heavily oxidized, leave the DeoxIT® on overnight, if possible. 2. The following day, remove any contaminants with a lint-free swab or cloth and "canned" (compressed) air if necessary. 3. When no contaminants are evident on the swab or cloth, apply 1-2 bursts DeoxIT® GOLD GxL. Maintain thereafter with DeoxIT® GOLD GxL.
DeoxIT® does not necessarily remove any superficial discoloration caused by oxidation.
Wipe off excess product with a clean, lint-free cloth when using 100% solutions.
NOTE: DeoxIT® GOLD (formerly ProGold) DeoxIT® GOLD GxL (formerly ProGold GxL) DeoxIT® SHIELD (formerly PreservIT) DeoxIT® FaderLube (formerly CaiLube MCL) DeoxIT® FaderGrease (formerly CaiLube MCL P20 & P40) DeoxIT® Grease Type M260 & L260 Paste (formerly CaiLube Grease).
|